Buka jam 08.00 s/d jam 17.00 , Minggu libur
Beranda » Alat Lab Beton dan Struktur

Alat Lab Beton dan Struktur

Alat Lab Beton dan Struktur yang kami jual dan produksi diantaranya :

  1. Mesin Kuat Tekan Beton Analog
  2. Mesin Kuat Tekan Beton Digital
  3. Mesin Uji Tarik Baja + Test Kuat Tekan Beton
  4. Hydraulic Concrete Beam Testing Machine 100 kN
  5. Compression Machine 250 kN
  6. Concrete Moulding
  7. Vibrating Table
  8. Compressive Strength of Hydraulic Cement Mortar
  9. Air Permeability of Proland Cement by Fineness Device
  10. Specific Grafity of Hydraulic Cement Test
  11. Time of Setting of Hydraulic Cement by Vcat Needle
  12. Compacting Factor Apparatus
  13. Slump Test Set
  14. Vebe Time
  15. Air Content of fresh Mixed Concrete
  16. Vertical Cylinder Capping Set
  17. Modulus of Elasticity in Concrete Test Set
  18. Splite Tensile Test
  19. Laboratory Concrete Mixer
  20. Core Drilling Test Set
  21. Digital Concrete Test Hummer
  22. Concrete Test Hummer
  23. Rebar Detection System by Profoscope
  24. Building Moisture Meter
  25. Secific Gravity & Absorption of Coarse Aggregate Test Set
  26. Elongation Index
  27. Flakiness Gauge
  28. Absorption of Fine Aggregate Test Set
  29. Sand Equivalent Shaker
  30. Sand Equivalent Test Set
  31. Sample Splitter
  32. Los Angeles Abration Machine
  33. Bulk Density Test
  34. Organic Impurities Tes Set
  35. Soundness Test Set

 

Alat Lab Beton dan Struktur Compression Machine 2.000 kN (Manometer Reading)

For determining compresive strength of concrete cube up to size 15 x 15 x 15 cm or concrete cylinder 15 cm dia x 30 cm height

Mesin Kuat Tekan Beton Analog

For determining compresive strength of concrete cube up to size 15 x 15 x 15 cm or concrete cylinder 15 cm dia x 30 cm height
2.000 kN Capacity x 5 kN Increments; Electric Hydraulic Pump
ASTM C-39; According SNI 03-1974-1990Technical data :

  • Frame : Heavy-duty welded steel construction 30 cm [-profile steel colums 10 cm thick bottom and upper plate.
  • Hydraulic System : Mild steel cylinder, hard-chromed piston 230mm diameter max. working pressure 50.000 kPa, overall dimension 300mm dia x 320mm height, single action; gravity return.
  • Hydraulic Pump : Electric 220 V-AC, 50-60Hz, 1000 Watt, 1 Phase, Single Action, varible speed, 6.000ml reservoir capacity. Maximum working pressure 50.000 kPa, single action; gravity return
  • Force Gauge : Bourdon tube manometer; 280mm dial diameter with maximum load pointer (red pointer); steel box housing
  • Platen : Lower 250mm diameter
  • Clearence : Horizontal 290mm; Vertical 310mm
  • Dimension l x w x h : 760 x 320 x 1400 mm approx.
  • Weight : 500 kg approx.
  • Standard Supply : The equipment supplied including :
    – Straight level
    – Distance block 15cm, 20 cm cube as standard (3 pieces)
    – Calibration certificate KAN LK-11-IDN
    – Instruction manual books

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Digital Compression Machine 2.000 kN (Manometer Reading)

For determining compresive strength of concrete cube up to size 15 x 15 x 15 cm or concrete cylinder 15 cm dia x 30 cm height

Mesin Kuat Tekan Beton Digital
For determining compresive strength of concrete cube up to size 15 x 15 x 15 cm or concrete cylinder 15 cm dia x 30 cm height
2.000 kN Capacity x 5 kN Increments; Electric Hydraulic Pump
ASTM C-39; According SNI 03-1974-1990Tecnical data :

  • Frame : Heavy-duty welded steel construction 30 cm [-profile steel colums 10 cm thick bottom and upper plate.
  • Hydraulic System : Mild steel cylinder, hard-chromed piston 230mm diameter max. working pressure 50.000 kPa, overall dimension 300mm dia x 320mm height, single action; gravity return.
  • Hydraulic Pump : Electric 220 V-AC, 50-60Hz, 1000 Watt, 1 Phase, Single Action, varible speed, 6.000ml reservoir capacity. Maximum working pressure 50.000 kPa, single action; gravity return
  • Load Measuring (Digital) :
    – Pressure tranducer connected with digital indicator
    – Digital readout, 6-bit LED display resolution
    – Reading results in (setup) kN or Kg, with data holder
    – External Power Supply 220 VAC, External rechargeable 6V DC Battery
    – Battery life : 80 hours continous use with 12 hour recharge time
    – Indicator Calibrated KAN LK-011-IDN
  • Clearence : Horizontal 290mm; Vertical 310mm
  • Dimension l x w x h : 760 x 620 x 1160 mm approx.
  • Weight : 460 kg approx.
  • Standard Supply : The equipment supplied including :
    – Straight level
    – Distance block 15cm, 20 cm cube as standard (3 pieces)
    – Calibration certificate KAN LK-11-IDN
    – Instruction manual books

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Compression-Tension Machine

These machine are mainly designed for compression strength or tensile test. Stock The machine is widelly in concrete and steel material testing. Suitable for concrete testing cube 15 cm, 15 x 30 cm dia, steel 6 to 16 mm bar diameter. Four coloum steel frame, twin gauges it adopts analog dial manometer to display test result. The hydraulic loading system is controlled manually by the hydraulic valve, variable speed. It is simple, easy to operate and widely use in works, laboratories and high school

Mesin Uji Tarik Baja + Test Kuat Tekan Beton

These machine are mainly designed for compression strength or tensile test. Stock
The machine is widelly in concrete and steel material testing.
Suitable for concrete testing cube 15 cm, 15 x 30 cm dia, steel 6 to 16 mm bar diameter.
Four coloum steel frame, twin gauges it adopts analog dial manometer to display test result.
The hydraulic loading system is controlled manually by the hydraulic valve, variable speed.
It is simple, easy to operate and widely use in works, laboratories and high school

Technical data :

  • Load Capacity : 500 kN x 1 kN increments for tensile test ; 1500 kN x 5 kN increments for compression test
  • Accuracy : < ± 2 % for compression ; < ± 1 % for tension
    Load Gauges :
    – Twin gauges 305 mm diameter
    – Each has a capacity of 500 kN for tensile test for steel and 1500 kN concrete compression test
    – Analog dial manometer with maximum red pointer
    – Calibration and certified KAN LK-011-IDN
  • Load Power : Electric hydraulic pump 220 V-AC, 1,350 W, 50-60Hz, working pressure 50,000 kPa, double action, variable speed
  • Space for Compression : 320 mm
  • Max. Distance Between Grip : 600 mm
  • Grip accommodate : 6 to 16 mm
  • Dimension of main frame (mm) : 600 (L) x 600 (w) x 1200 (H)
  • Dimension of control panel (mm) : 715 (L) x 680 (w) x 165 (H)
  • Overall Weight (Kg) : 680
  • Standard Supply : The equipment supplied including :
    – Straight level
    – Set of grip 6-8-10-12-16 mm, (5 pieces)
    – Calibration certificate Registered LK-11-IDN
    – Instruction user manual

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Hydraulic Concrete Beam Testing 100kN

For determining the Flexural Strength of concrete beam by using a simple beam with third point loading, 100 kN capacity, hydraulic hand pump, single action, Manometer reading with maximum load pointer, red pointer.

Hydraulic Concrete Beam Testing Machine 100 kN

ASTM C-78
For determining the Flexural Strength of concrete beam by using a simple beam with third point loading, 100 kN capacity, hydraulic hand pump, single action, Manometer reading with maximum load pointer, red pointer.

  • Calibration and certified KAN LK-011-IDN .
  • Sample size 15 x 15 x 60 cm .
  • Dimension (l x w x h) : 100 x 50 x 100 Cm / Gross weight : 110 Kg
  • Standard supply complete with :
    – Instruction manual operating
    – Calibration certificate KAN LK-11-IDN

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Standard Testing : Astm C-109

For determining compressive strength of cement mortar.

Compression Machine 250 kN
For determining compressive strength of cement mortar.

  • For sample size 2″ x 2″ x 2″ cube or 2″ dia x 4″ height cylinder.
  • Steel frame, 12″ diameter force gauge
  • Calibration and certified KAN LK-011-IDN
  • Hand operated, hydraulic hand pump 10.000 psi capacity.
  • Standard supply with instruction manual books
  • Dimension (l x w x h) : 50 x 50 x 80 Cm
  • Gross weight : 145 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Concrete Moulding

Cetakan Silinder Beton/Concrete Cylinder Mold Cetakan Kubus Beton/Concrete Cube Mold Concrete Beam Mold Cement Cube Mold

Concrete Moulding

  • Cetakan Silinder Beton/Concrete Cylinder Mold
    – inner size 10 cm dia x 20 cm height
    – Cast iron, for forming concrete cylinder sample
    – Gross weight : 12 kg
  • Cetakan Silinder Beton/Concrete Cylinder Mold
    – inner size 15 cm dia x 30 cm height
    – Cast iron, for forming concrete cylinder sample Stock
    – Gross weight : 17 kg
  • Cetakan Kubus Beton/Concrete Cube Mold
    – inner size 10 cm x 10 x 10 cm
    – Cast iron, for forming concrete cube sample
    – Gross weight : 14 kg
  • Cetakan Kubus Beton/Concrete Cube Mold
    – inner size 15 cm x 15 x 15 cm
    – Cast iron, for forming concrete cube sample
    – Gross weight : 19 kg
  • Concrete Beam Mold
    – Cast iron, for forming concrete beam sample
    – inner size : 15 cm x 15 x 60 cm
    – Gross weight : 40 kg
  • Cement Cube Mold
    50 x 50 x 50 mm, mild steel, parallel arrangement
    Fitted with angles for attaching to studs threaded into detachable baseplate. For Compression strength tests of portland cement, mortars lime and gypsum
    Shipping wt. 11.5lbs (5.2kg) approximately
  • Testing Standard :
    ASTM C87, C91, C109, C141, C267, C311, C472, C617,
    C618, C1073; AASHTO T71, T108

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Compressive Strength of Hydraulic Cement Mortar

For determining compressive strenght of hydraulic cement mortar by using 50 x 50 x 50 mm cube speciment

Compressive Strength of Hydraulic Cement Mortar

Standard Testing : ASTM C-109 / AASHTO T-106 Stock
For determining compressive strenght of hydraulic cement mortar by using 50 x 50 x 50 mm cube speciment

  • Consist of :
    Cement Cube Mold : 50 x 50 x 50 mm, three gang parallel arrangement, cast iron 1 set
  • For Compression strength tests of portland cement, mortars lime and gypsum
  • Flow Table, : Electric, 100 rpm, 220 Volt-AC, 100 Watt, 1 phase
    Consist of :
    Frame : Welded steel, brass table, 10″ diameter, 0.3 mm thick, 1/2″ drop 1 pcs
    Flow Mold : Brass, base 101.6 mm diameter, 69.85 mm top diameter, height 50.8 mm 1 pcs
    Vernier Caliper : 300 mm measuring capacity, double scale, stainless steel 1 pcs
    Tamper : Plastic, 1/2″ x 1″ face, 6″ length 1 pcs
    Glass Plate : Glass 10 mm thick, 30 x 30 cm 1 pcs
    Graduated Cylinder : Glass made, 250 ml single numbering 1 pcs
    Scraper : Plastic handle, stainless blade, 100 mm length. 1 pcs
    Standard supply with instruction manual book
    Dimension (l x w x h): 60 x 60 x 60 cm/ Gross weight: 42 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Air Permeability of Porland Cement by Fineness Device

For determining fineness of porland cement by air permeability

Air Permeability of Proland Cement by Fineness Device

ASTM C-204 / AASHTO T-153
For determining fineness of porland cement by air permeability

Consist of :

  • Stand : Polished wood 1 pcs
  • U-Tube Manometer : Glass tubing with valve 1 pcs
  • Permeability Cell : Stainless steel 1 pcs
  • Perforated Disc : Non corroding metal 1 pcs
  • Plunger : Stainless steel 1 pcs
  • Stock Solution : Dibutylphtalate 0 ltr
  • Filter Paper : Type 1, grade B 1 box
  • Funnel : Glass made, narrow mouth 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 30 x 25 x 70 Cm/ Gross weight : 10 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Specific Gravity of Hydraulic Cement Test

For determining specific gravity of hydraulic cement

Specific Grafity of Hydraulic Cement Test

ASTM C-188 / AASHTO T-133
For determining specific gravity of hydraulic cement

Consist of :

  • Le Chatelier Flask : 250 ml cap., the neck graduated 0-1 ml,and 15-24 ml 1 pcs
  • Kerosene : Deaired kerosene 1 ltr
  • Funnel : Glass made, narrow mouth 1 pcs
  • Wash Bottle : Plastic, 250 ml capacity 1 pcs
  • Pipette : Glass, 5 ml capacity 1 pcs
  • Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length 1 pcs
  • Spatula : Plastic handle, stainless blade, 150 mm length 1 pcs
  • Soft Brush : Black hair, round type 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 20 x 20 x 30 Cm/ Gross weight : 8 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Time of Setting of Hydraulic Cement by Vicat Needle

For determining normal consistency and time of setting of hydraulic cement

Time of Setting of Hydraulic Cement by Vcat Needle

ASTM C-187/C-191; T-129/T-131
For determining normal consistency and time of setting of hydraulic cement

Consist of :

  • Vicat Apparatus : Cast alumunium frame, stainless steel rod 10 mm diameter 300 gr weight with needle, 0 – 50 mm scale 1 pcs
  • Initial Needle : Steel needle, 1 mm diameter, with footing, brass thread 1 pcs
  • Final Needle : Steel needle, 1 mm diameter, brass, thread 1 pcs
  • Conical Ring Mold : 70 mm base diameter, 60 mm top dia, 40 mm height 1 pcs
  • Glass plate : Glass, 10 mm thick, 12 x 12 cm. 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 60 x 30 x 30 cm/ Gross weight: 8 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur

For determining workability of compacting factor concrete of low, medium and high workability. Welded steel frame construction, two conical mold, one cylinder mold.

Compacting Factor Apparatus

For determining workability of compacting factor concrete of low, medium and high workability. Welded steel frame construction, two conical mold, one cylinder mold.

  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 30 x 60 x 130 cm
  • Gross weight : 75 Kg

 

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Struktur dan Jalan Raya Slump Test Set

For determining slump/ workability of concrete both in the laboratory and in the field

Slump Test Set

ASTM C-143 / AASHTO T-119, According SNI 03-1972-1990
For determining slump/ workability of concrete both in the laboratory and in the field

Consist of :

  • Slump Cone : Heavy gauge sheet steel, 4″ top dia, 8″ bottom dia, 12″ height 1 pcs
  • Inspection Scale : Machine steel, 0-10 cm slump measurement, 1 cm increment 1 pcs
  • Base Plate : Steel sheet, carrying handle, 600 x 600 x 5 mm 1 pcs
  • Scoop : Cast alumunium, large size, round buttom 1 pcs
  • Trowel : Pointed type, wooden handle 1 pcs
  • Steel Wire Brush : Wooden handle 1 pcs
  • Tamping Rod : Machine steel, galvanized 16 mm dia, 600 mm length 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h): 70 x 70 x 50 Cm / Gross weight: 30 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Vebe Time BS-1881

This methode is mechanised variation of the slump test and a determination of the work ability of concrete

Vebe Time

This methode is mechanised variation of the slump test and a determination of the work ability of concrete.

Consist of :

  • Vibro Consistometer : Electric, 220 V, 50 Hz, 1 Phase, 200 watt 1 set
  • Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min 1 pcs
  • Scoop : Cast alumunium, large size, round buttom 1 pcs
  • Tamping Rod : Machine steel, galvanized 16 mm dia, 600 mm length 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 40 x 40 x 100 Cm/ Gross Weight : 25 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Air Content of Fresh Mixed Concrete

For determining the air content of fresly mixed concrete from observation of the change in volume of concrete with a charge in pressure

Air Content of fresh Mixed Concrete

ASTM C-231 / AASHTO T-152
For determining the air content of fresly mixed concrete from observation of the change in volume of concrete with a charge in pressure

Consist of :

  • Air Entrainment Meter : 5 ltrs capacity. 2″ maximum aggregate size, direct reading 0 – 10% manometer, with hand pump pressure up to 160 psi. 1 pcs
  • Calibration and certified by KAN LK-011-IDN .
  • Carrying Case : Wooden box 1 pcs
  • Scoop : Cast alumunium, large size, round buttom 1 pcs
  • Trowel : Pointed type, wooden handle 1 pcs
  • Straight Edge : Galvanized steel, 40 cm length 1 pcs
  • Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle 1 pcs
  • Brush : Steel wire, wooden handle 1 pcs
  • Tamping Rod : Machine Steel, galvanized 16 mm dia, 600 mm length 1 pcs
  • Dimension (l x w x h): 40 x 40 x 100 Cm / Gross weight: 20 Kg
  • Standard supply complete with :
    – Instruction manual operating
    – Calibration certificate KAN LK-11-IDN

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Vertical Cylinder Cupping Set

Equipment for forming caps on ends of 15 cm diameter concrete cylinder to provide uniform loading surface for compression test.

Vertical Cylinder Capping Set

ASTM C-617
Equipment for forming caps on ends of 15 cm diameter concrete cylinder to provide uniform
loading surface for compression test.

Consist of :

  • Vertical Cylinder Capper : Cast alumunium frame, rotating ground table, for 150 mm diameter concrete cylinder. 1 pcs
  • Capping Compound Warmer : Approx 3 ltr cap, heating temperature up to 200°C, 220 V-AC 1 pcs
  • Capping Ladle : Stainless steel ladle, wooden handle
  • Cylinder Carrier : Double handle, snap clamp, for 150 mm diameter concrete cylinder. 1 pcs
  • Capping Compound : Powder, approx 115 °C pouring temperature. 25 kg
  • Dimension (l x w x h) : 100 x 60 x 60 Cm/ Gross weight : 35 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Modulus of Elasticity In Concrete Test Set

For measuring average axial deformation of concrete cylindrical sample during compression test cast alumunium, provided with dial indicator 0.001 x 5 mm

Modulus of Elasticity in Concrete Test Set

For measuring average axial deformation of concrete cylindrical sample during compression test cast alumunium, provided with dial indicator 0.001 x 5 mm.

  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 30 x 30 x 35 Cm
  • Gross weight : 5 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Splite Tensile Test BS-1881

For splite cylinder test on specimens of 150 diameter x 300 mm length, self-supporting lower plate

Splite Tensile Test

For splite cylinder test on specimens of 150 diameter x 300 mm length, self-supporting lower plate.

  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 35 x 20 x 25 Cm
  • Gross weight : 4 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Laboratory Concrete Mixer

For mixing trial bathes of concrete for mix design approx 70 litre capacity, 4 mixing blades welded steel frame, 2 wheels for easy movement, electromotor 1/2 HP, 220 V-AC, 1 Phase

Laboratory Concrete Mixer

For mixing trial bathes of concrete for mix design approx 70 litre capacity, 4 mixing blades welded steel frame, 2 wheels for easy movement, electromotor 1/2 HP, 220 V-AC, 1 Phase.

  • Dimension : 80 x 60 x 130 Cm
  • Weight : 60 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Core Drilling Test Set

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.

Core Drilling Test Set

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.
Consist of :

  • Core Drilling Machine : Cast alumunium frame, gasoline engine 6.75 HP, 4 cyle 1 set
  • Briggs & Stratton USA, vertical drilling position : rubber caster.
  • Designed for cut core up to 6″ diameter.
  • Diamond Core Bit : 4″ inner dia, 300 mm effective depth, 450 mm long (Original
  • Hoffman – USA) 1 pcs
  • Sample Tong : 4″ diameter 1 pcs
  • Breaking Strip : Galvanized steel 1 pcs
  • Wrench : Steel spanner, 42 mm and 32 mm 2 pcs
  • Dimension (l x w x h): 97 x 57 x 150 cm/ Gross weight: 145 Kg
  • Standard supply with instruction manual books

Kategori : Alat Lab Beton dan Struktur

 

Digital Concrete Test Hammer

PC communication, increased memory capacity and Hammerlink software

Digital Concrete Test Hummer

PC communication, increased memory capacity and Hammerlink software
ASTM C-805; EN-12 504-2; ENV 206; DIN 1048 part 2;
ASTM D 5873 (rock); D 5873; JGJIT 23-2001 part 202, JJG-1993.
Original Silver schmidt Type PC N – Switzerland 341 31 000
Features :
Measurement inherently independent of impact direction, meaning no directional corrections are necessary.
High measuring accuracy due to differential optical absolute velocity encoder.
Q value (measuring the true Rebound Coeficient)
The Q value (= rebound velocity divided by inbound velocity) represents the physical rebound coeficient.
The Q value need not be corrected for impact direction.
There is however a clear relationship beetwen the Q and the R value.
Conversion curves for a wide range of compressive concrete strengths, including low fc (<10 N/mm2, 1’450 psi) and high strength concrete (up to 170 N/mm2, 24’650 psi).
Simple operation with “one-button”, combined with advanced tilt and twist technology use interface.
Language independent graphical menu with symbols
Automatic conversion to the required measurement unit (N/mm2, kg/cm2, psi)
PC application : Hammerlink Software
Electrical data :
– Display, 17 x 71 pixels; graphic / alphanumeric
– Power consumption, ~13 mA measuring, ~4 mA setup and review, ~0.02 mA idle
– Accumulator duty, > 1000 impacts (before recharging)
– Charger connection, USB type B (5V, 100 mA)

Specification :

  • Impact energy : 2.207 Nm
  • Hammer mass : 115 g
  • Spring constant : 0.79 N/mm
  • Spring extension : 75 mm
  • Housing dimensions : 55 x 55 x 250 mm (340 mm to tip of plunger)
  • Plunger dimensions (visible part) : 105 x ø15 mm / radius of spherical tip 25 mm
  • Operating temperature : 0 to 50 °C
  • Storage temperature : -10 to 70 °C
  • Weight : 600 g
  • Standards supply consist of :
  • Hammerlink sofware, battery charge with USB-cable,
  • Data carrier, Carrying strip, Grinding stone, Chalk,
  • Documentation and Carrying case.

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Concrete Test Hammer

This concrete test hammer, entirely produced by Matest, has aluminium frame, and thanks to its very accurate manufacture processing and selected components ensures high precision test results in the time. The top quality test hammer available on the market.

Rebar Detection System by Profoscope

  • ASTM C805, BS 1881;202 EN 12504/2, UNI 7997, DIN 1048
  • Original type : C 380 Italy
  • Spring impact energy 0,225 mkg. (2,207 Joule)
  • Suitable for finished concrete structures and buildings having strength resistances from 10 to 70 N/sq.mm.
  • This concrete test hammer, entirely produced by Matest, has aluminium frame, and thanks to its very accurate manufacture processing and selected components ensures high precision test results in the time. The top quality test hammer available on the market.
  • Supplied complete with calibration curve chart, abrasive stone, carrying case.
  • Dimensions : dia. 80 x 340 mm / Weight: 3 Kg
  • Standard supply with instruction manual book
  • Calibration and Certified KAN LK-011-IDN

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Rebar Detection System by Profoscope

According Testing Standard : BS 1881 part 204; DIN 1045; SN 505 262; DGZfP B2

Rebar Detection System by Profoscope

According Testing Standard : BS 1881 part 204; DIN 1045; SN 505 262; DGZfP B2
“Profoscope has a unique real-time rebar visualization allowing the user to actually “SEE” the location
of the rebar beneath the concrete surface to a maximum depth of 180 mm. “
Profoscope has a unique real-time rebar visualization allowing the user to actually “SEE” the location of the rebar beneath the concrete surface to a maximum depth of 180 mm and measuring bar size of 55 mm diameter.
Original Proceq 391 20 000, Schmidt – Switzerland
Application :
Rebar detection – (e.g. general contractors, civil contractors, drilling specialists, electrical contractors)
Measurement of concrete cover – (e.g. general contractors, civil contractors, civil engineers)
Measurement of rebar diameter – (e.g. educational institutes, building inspectors, civil contractors)
Checking for minimum cover – (e.g. building inspectors, civil contractors)
Map out the rebar grid and cover for corrosion studies (with Canin+) – (e.g. building inspectors)
Rebar grid examination for planned load changes on the structure – (e.g. civil engineers, civil contractors)
Features :
Real-time visualization of the Rebar location beneath the instrument Real-time visualization of the rebar location beneath the instrument
Visual indication of rebars in close proximity
Ability to detect rebars and the mid-point between rebars as well as the orientation of the rebars
Optical and acoustical indication of Rebar location and minimum cover alert
Neighboring bar correction
Regional settings (metric, imperial)
Cordless and single handed operation
Switchable display backlight for dark environments
Icon-based language independent menus
Start-up test kit allows user to familiarize him/herself with all functions in a comfortable environment, wasting no time on site

Technical Data :

  • Measuring Range : See graph on previous page for maximum range relative to bar diameter
  • Power Supply : Power source : 2 x 1.5 VAA (LR6) Batteries ; Voltage range : 3.6 V to 1.8 V
  • Current Consumption :
    – Power on, backlight off : – 50 mA
    – Power on, backlight on : – 200 mA
    – Sleep mode : -10 mA
    – Power off : < 1 μA
  • Battery Lifetime : Backlight off : > 50 h / Backlight on : > 15 h
  • Time Outs : Sleep mode : 30 s / Auto shut down : 120 s ;
  • Environmental Conditions :
    – Temperature range : -10° to 60° C (14° to 140° F)
    – Humidity range : 0 to 100% rH / Protection class : IP54
  • Complete with standard :
  • Canvas Bag (391 80 100) / Battery type AA (350 74 025)
  • Carrying Strap (391 80 110) / Memory card + USB cable
  • Carrying Strap + chalk / ProfoLink software
  • Gross Weight 2.0 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Protimeter Timbermaster Mini Moisture Meter

Exclusive moisture in building will lead to decay and deterioration Stock of components and decorative finishes. Professional involved with the identification, management and remedy of dampness need tools that help them

Building Moisture Meter

Exclusive moisture in building will lead to decay and deterioration Stock of components and decorative finishes. Professional involved with the identification, management and remedy of dampness need tools that help them to :
Identify the extent of the dampness
Diagnose the cause of the problem
Monitor change in the moisture level
Measure Mode :
Pin-type probes measure moisture in wood and other building materials (use provided calibration chart for more precise readings)
Detects moisture directly in materials and below wall and floor coverings such as tile, wood and vinyl
Deep wall probes establish the presence of moisture in wall cavity insulation, sub and surface structures
Assess, in relative terms, if the material is in a dry, borderline or damp condition

Applications :

  • Concrete and concrete block, wood and wood floors, drywall, stucco, plaster, masonry and EIFS.
  • Moisture Range (WME) :
    – Range : 0 to 999 relative (non-invasive)
    – Range : 7% to 99% WME (pin measurement)
  • Max. needle penetration : 0.4″ (10mm)
  • Non-Invasive (RF) moisture range : 6 to 100% (relative) up to 3/4″(19.05mm) deep
  • Resolution : 0.1%
  • Power : (1) 9v battery (included)
  • Dual Display LCD and LED
  • Digital 60 LED’s Green (“dry”) , Yellow (“at risk”) and Red (“wet”)
  • Digital LCD
  • Audible alert (may be switched on/off by the user)
  • Auto power off (ay be switched off, or set between 1-3 minutes, by the user)
  • Reset reading for sensitivity adjustment
  • Hold Feature

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Stuktur Elongation Index

For rapid measuring the length of aggregates

Elongation Index

  • BS-812 (SNI 03-4137-1996)
  • For rapid measuring the length of aggregates
  • Hard wood base, steel base plate, distance : 89.0, 62.86, 39.9, 28.5, 20.1, 14.2 mm

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Flakiness Gauge

For determing the flakiness index of coarse aggregate

Flakiness Gauge

For determing the flakiness index of coarse aggregate
Galvanized metal sheet, hole size 100 x 33.9 ; 90 x 26.3 ; 80 x 19.7 ; 60 x 14.4 ; 50 x 10.2, 40 x 7.2, 30 x 4.9

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Absorption of Fine Aggregate Test Set

For determining the water absorption of fine aggregate at saturated surface dry

Absorption of Fine Aggregate Test Set

ASTM C-128 / AASHTO T-84
For determining the water absorption of fine aggregate at saturated surface dry.

Consist of :

  • Cone : Brass, 40 mm i.d; the top 90 mm i.d at the bottom, 75mm heigh 1 pcs
  • Tamper : Machine steel, plated, 340 gr weight, 25 mm dia. 1 pcs
  • Mixing Bowl : Stainless steel, round type, 25 cm diameter 1 pcs
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1 pcs
  • Volumetric Flask : 500 ml capacity, heat resistance glass 1 pcs
  • Spatula : Stainless blade, 150 mm length, plastic handle 1 pcs
  • Dimension (l x w x h): 40 x 40 x 30 cm/ Gross Weight: 7 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Sand Equivalent Shaker

To give greater uniformity action, hand operated mounting bracket with cylinder holder, two spring steel strapes, built in counter, wooden case, supplied without graduated cylinder

Sand Equivalent Shaker

ASTM D-2419 / AASHTO T-176
To give greater uniformity action, hand operated mounting bracket with cylinder holder, two spring steel strapes, built in counter, wooden case, supplied without graduated cylinder.
Standard supply with instruction manual book
Dimension (l x w x h): 60 x 30 x 90 cm / Gross weight: 20 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Sand Equivalent Test Set

For indicating relative proportion of clay like meterial and fine dust in granular soil or graded aggregate

Sand Equivalent Test Set

ASTM D-2419 / AASHTO T-176
For indicating relative proportion of clay like meterial and fine dust in granular soil or graded aggregate.

Consist of :

  • Graduated Cylinder : Transparent fibre glass, 1 1/4″ i.d, 1 1/2″ o.d 17″ height, with scale 2 pcs
  • Stoper Assembly : Rubber stoper, irrigation tube, hose, sypon 1 set 1 set
  • Weight Foot Assembly : Machine steel, galvanized, 1000 gr weight, sand reading indicator 1 set
  • Stock Solution : Calcium chloride, glyserin and formaldehyde solution. supplied in a plastic bottle 1 litre capacity 1 btl
  • Carrying Case : Wooden case with handle 1 pcs
  • Thin Box : Alumunium 60 gr capacity 2 pcs
  • Funnel : Plastic, narrow mouth 1 pcs
  • Standard supply with instruction manual book
  • Dimension (l x w x h): 70 x 50 x 20 cm
  • Gross weight: 20 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Sample Splitter

For dividing dry material such as gravel, sand, mine, and general laboratory purpose

Sample Splitter

For dividing dry material such as gravel, sand, mine, and general laboratory purpose

  • SAMPLE SPLITTER 1/2″ : Stainless steel, chute width 1/2 inch, 12 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 3/4″ : Stainless steel, chute width 3/4 inch, 12 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 1″ : Stainless steel, chute width 1 inch, 12 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 1 1/2″ : Stainless steel, chute width 1 1/2 inch, 8 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 2″ : Stainless steel, chute width 2 inch, 8 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 2 1/2″ : Stainless steel, chute width 2 1/2 inch, 8 holes
    Supplied complete with pans. 
  • SAMPLE SPLITTER 3″ : Stainless steel, chute width 3 inch, 8 holes
    Supplied complete with pans. 
  • G-122 PRECISSION SAMPLE SPLITTER : Stainless steel, chute width 1/4″ x 32 holes
    Supplied complete with scoop and pans. 
    Dimension (l x w x h) : 50 x 50 x 50 cm / Gross weight : 10 Kg
  • AG-111 GILSON SAMPLE SPLITTER : Painted plate frame, alumunium chute, variable chute width, 1/2″ increment (1/2″, 1″, 1 1/2″, 2″, etc); supplied with pans
    Standard supply with instruction manual book
    Dimension (l x w x h) : 110 x 50 x 50 cm / Gross Weight : 65 Kg

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Sieve

For determining grain size distribution of soil particles or sand/ gravel

Sieve

Brass frame 8″ diameter, 70 mm height

Dimension (l x w xh) : 22 x 22 x 6.5
Gross weight : 0.75 Kg
SIEVE # 4 : Brass round 8 inch diameter, mesh 4.75 mm opening
SIEVE # 8 : Brass round 8 inch diameter, mesh 2.36 mm opening
SIEVE # 10 : Brass round 8 inch diameter, mesh 2.00 mm opening
SIEVE # 12 : Brass round 8 inch diameter, mesh 1.70 mm opening
SIEVE # 16 : Brass round 8 inch diameter, mesh 1.18 mm opening
SIEVE # 20 : Brass round 8 inch diameter, mesh 0.850 mm opening
SIEVE # 30 : Brass round 8 inch diameter, mesh 0.600 mm opening
SIEVE # 40 : Brass round 8 inch diameter, mesh 0.425 mm opening
SIEVE # 50 : Brass round 8 inch diameter, mesh 0.300 mm opening
SIEVE # 60 : Brass round 8 inch diameter, mesh 0.250 mm opening
SIEVE # 70 : Brass round 8 inch diameter, mesh 0.212 mm opening
SIEVE # 80 : Brass round 8 inch diameter, mesh 0.180 mm opening
SIEVE # 100 : Brass round 8 inch diameter, mesh 0.150 mm opening
SIEVE # 120 : Brass round 8 inch diameter,mesh 0.125 mm opening
SIEVE # 140 : Brass round 8 inch diameter, mesh 0.106 mm opening
SIEVE # 170 : Brass round 8 inch diameter, mesh 0.090 mm opening
SIEVE # 200 : Brass round 8 inch diameter, mesh 0.075 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

Dimension (l x w xh) : 22 x 22 x 6.5
SIEVE 4″ : Brass round 8 inch diameter, mesh 101.6 mm opening
SIEVE 3 1/2″ : Brass round 8 inch diameter, mesh 88.9 mm opening
SIEVE 3″ : Brass round 8 inch diameter, mesh 76.2 mm opening
SIEVE 2 1/2″ : Brass round 8 inch diameter, mesh 62.5 mm opening
SIEVE 2″ : Brass round 8 inch diameter, mesh 50.8 mm opening
SIEVE 1 3/4″ : Brass round 8 inch diameter, mesh 44.4 mm opening
SIEVE 1 1/2″ : Brass round 8 inch diameter, mesh 38.1 mm opening
SIEVE 1 1/4″ : Brass round 8 inch diameter, mesh 31.7 mm opening
SIEVE 1″ : Brass round 8 inch diameter, mesh 25.4 mm opening
SIEVE 7/8″ : Brass round 8 inch diameter, mesh 22.2 mm opening
SIEVE 3/4″ : Brass round 8 inch diameter, mesh 19.0 mm opening
SIEVE 5/8″ : Brass round 8 inch diameter, mesh 15.8 mm opening
SIEVE 1/2″ : Brass round 8 inch diameter, mesh 12.7 mm opening
SIEVE 7/16″ : Brass round 8 inch diameter, mesh 11.1 mm opening
SIEVE 3/8″ : Brass round 8 inch diameter, mesh 9.5 mm opening
SIEVE 5/16″ : Brass round 8 inch diameter, mesh 7.9 mm opening
SIEVE 1/4″ : Brass round 8 inch diameter, mesh 6.3 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Los Angeles Abrassion Machine

For determining degradation of mineral aggregates from abrassion, impact and grinding

Los Angeles Abration Machine

ASTM C-131 / AASHTO T-96
For determining degradation of mineral aggregates from abrassion, impact and grinding.

Consist of :

  • Los Angeles Abrasion Machine :
    – Frame : Welded steel frame 8 and 12 cm (steel profile) 1 set
    – Drum : 1/2″ thick steel plate 28″ inner dia. 20″ inner width.
    – Automatic Counter : Digital, module system for easy maintanance
    – Panel button : on-OFF-RUN-STOP-JOG-RESET-500-1000
    – Power : Electromotor, dual voltage 110-220V, 750 watt, 1 Phase, heavy duty speed reducer.
    – Drum Speed : 30 – 33 rpm
  • Steel Ball : Steel 1 7/8″ diameter 12 pcs
  • Catching Pan : Galvanized steel 1 pcs
  • Dimension (l x w x h): 120 x 100 x 150 cm/ Gross weight: 450 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Bulk Density Test

For determining bulk density of fine, coarse or mix aggregate

Bulk Density Test

ASTM C-29 / AASHTO T-19 2 weeks
For determining bulk density of fine, coarse or mix aggregate

Consist of :

  • Container : Machine steel, galvanized, 3 ltr capacity 1 pcs
  • Container : Machine steel, galvanized, 10 ltr capacity 1 pcs
  • Container : Machine steel, galvanized, 15 ltr capacity 1 pcs
  • Container : Machine steel, galvanized, 30 ltr capacity 1 pcs
  • Tamping Rod : Machine steel, galvanized 16 mm dia, 600 mm length 1 pcs
  • Dimension (l x w x h) : 60 x 45 x 55 cm / Gross weight : 60 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Organis Impurities Test Set

For an approximate determination of organic compound in sand

Organic Impurities Tes Set

ASTM C-88 / AASHTO T-104 Stock
For determining aggregate resistance to desintegration by saturated solution of sodium sulfate or magnesium sulfate.
Consist of :

  • Stock Solution : Sodium sulphate solution (Na2SO4),1 litre 1 btl
  • Mixing Bowl : Stainless steel, 24 cm diameter 1 pcs
  • Beaker Glass : Glass made, with spout, 1000 ml capacity 1 pcs
  • Thermometer : Range 0 to 100°C, glass, alcohol indicator, 30 cm length 1 pcs
  • Dimension (l x w x h) : 80 x 50 x40 cm / Gross weight : 8 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

 

Alat Lab Beton dan Struktur Soundness Test Set

For determining aggregate resistance to desintegration by saturated solution of sodium sulfate or magnesium sulfate.

Soundness Test Set

ASTM C-88 / AASHTO T-104 Stock
For determining aggregate resistance to desintegration by saturated solution of sodium sulfate or magnesium sulfate.
Consist of :

  • Stock Solution : Sodium sulphate solution (Na2SO4),1 litre 1 btl
  • Mixing Bowl : Stainless steel, 24 cm diameter 1 pcs
  • Beaker Glass : Glass made, with spout, 1000 ml capacity 1 pcs
  • Thermometer : Range 0 to 100°C, glass, alcohol indicator, 30 cm length 1 pcs
  • Dimension (l x w x h) : 80 x 50 x40 cm / Gross weight : 8 Kg
  • Standard supply with instruction manual book

Kategori : Alat Lab Beton dan Struktur

Bagikan informasi tentang Alat Lab Beton dan Struktur kepada teman atau kerabat Anda.

Alat Lab Beton dan Struktur | Alat Pertambangan

Temukan Kami

Kategori

Tutorial Bomb Calorimeter Toshniwal

error: Content is protected !!
Sidebar Kiri
Kontak
Sidebar Kanan