Building Moisture Meter

Protimeter Timbermaster Mini Moisture Meter
Exclusive moisture in building will lead to decay and deterioration Stock of components and decorative finishes. Professional involved with the identification, management and remedy of dampness need tools that help them to :

  • Identify the extent of the dampness
  • Diagnose the cause of the problem
  • Monitor change in the moisture level
    Measure Mode :
  • Pin-type probes measure moisture in wood and other building materials (use provided calibration chart for more precise readings)
  • Detects moisture directly in materials and below wall and floor coverings such as tile, wood and vinyl
  • Deep wall probes establish the presence of moisture in wall cavity insulation, sub and surface structures
  • Assess, in relative terms, if the material is in a dry, borderline or damp condition
    Applications :
    Concrete and concrete block, wood and wood floors, drywall, stucco, plaster, masonry and EIFS.
  • Moisture Range (WME) :
    – Range : 0 to 999 relative (non-invasive)
    – Range : 7% to 99% WME (pin measurement)
  • Max. needle penetration : 0.4″ (10mm)
  • Non-Invasive (RF) moisture range : 6 to 100% (relative) up to 3/4″(19.05mm) deep
  • Resolution : 0.1%
  • Power : (1) 9v battery (included)
  • Dual Display LCD and LED
  • Digital 60 LED’s Green (“dry”) , Yellow (“at risk”) and Red (“wet”)
  • Digital LCD
  • Audible alert (may be switched on/off by the user)
  • Auto power off (ay be switched off, or set between 1-3 minutes, by the user)
  • Reset reading for sensitivity adjustment
  • Hold Feature