Alat Lab Tanah dan Mekanika Tanah

  1. Hand Bor (Soil Sampling Apparatus)
  2. Sample Extruder
  3. Electric Sample Extruder
  4. Standard Penetration Test
  5. Corps of Engineer Soil Surface Sampler
  6. Dutch Cone Penetrometer / Sondir 5 Ton Capacity
  7. Hydraulic Cone Penetrometer / Sondir Hidrolik 5 Ton Capacity
  8. Drilling RIG Machine with SPT (Standard Penetration App)
  9. Dynamic Cone Penetrometer/DCP
  10. Plate Bearing Test Set
  11. Field CBR Test Set (CBR Lapangan)
  12. Proving Ring Penetrometer
  13. TVA Penetration
  14. Liquid Limit Test Set (Hand Operated)
  15. Liquid Limit Test Set (Electric)
  16. Plastic Limit Test Set
  17. Shrinkage Limit Test Set
  18. Hydometer Aalysis Test Set
  19. Sieve Analysis
  20. Wet Washing Sieve
  21. Electric Sieve Shaker
  22. Mechanical and Open and Shaker
  23. Vacuum Stand (GMM Vacuum Methode)
  24. Spesific Gravity (Heating Methode)
  25. Spesific Gravity & Absorption of Fine Aggregate Test Set
  26. Spesific Gravity (Vacuum Methode) 1
  27. Spesific Gravity (Vacuum Methode) 2
  28. Compaction Test
  29. Laboratory CBR Test Set (Electric)
  30. Laboratory CBR Test Set (Hand Operated)
  31. Combination Permeameter (Constant head & Falling head testing methode)
  32. Compaction Permeameter Test Set 1
  33. Compaction Permeameter Test Set 2
  34. Sand Cone Test Set
  35. Speedy Moisture Tester (c/w Digital Balance)
  36. Moisture Content Test Set
  37. Unconfined Compression Machine (Hand Operated)
  38. Unconfined Compression Machine (Electric)
  39. Consolidation Test Set
  40. Direct Shear Test Set (Hand Operated)
  41. Electric Direct Shear Test Set
  42. Triaxial Test Set

Alat Lab Tanah dan Mekanika Tanah

Drilling for soil sampling preparation
 Hand Bor (Soil Sampling Apparatus)

Consist of :

  • Drilling Rod : Solid bar, 1 m length, 1 1/4″ dia 10.00 pcs
  • Iwan Type Auger : Welded steel, two radial blades, 4″ dia 1.00 pc
  • Straight Choping Auger : Steel bar, hardened tip, 45 mm width 1.00 pc
  • T-Piece : Welded steel 1.00 pc
  • Tube Adaptor : Machine steel, with 3 clamping bolts 1.00 pc
  • Turning Rod : Machine steel, 1 1/4″ dia, 60 cm length 2.00 pc
  • Sampling Tube : 68 mm dia, 40 cm length, with 3 bolt holes 10.00 pcs
  • Rod Head : Hardened, machined steel, 2 1/2″ dia 1.00 pc
  • Parafin : Parafin 2.00 kg
  • Vertical Guide : Machine Steel 1.00 pc
  • Allen Key : Hardened steel, 1/4” 1.00 pc
  • Pipe Wrench : 24″ Wrench 2.00 pcs
  • Hammer : Steel, 5 kg weight, wooden handle 1.00 pc
  • Steel Wire Brush : Wooden handle, for cleaning laboratory/field apparatus 1.00 pc
  • Dimension (l x w x h) : 105 x 60 x 60 cm/ Gross weight : 130 Kg
  • Standard supply with instruction manual books
 

 

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), welded steel, screw type
 Sample Extruder

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), welded steel, screw type.

  • Supplied without sampling tube.
  • Standard supply with instruction manual operating
  • Dimension (l x w x h) : 125 x 15 x 25 Cm
  • Gross weight : 45 Kg
 

 

For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration
 Standard Penetration Test

ASTM D-1586 / AASHTO T-206
For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration.

Consist of :

  • Split Barrel Sampler : Hardened machined steel, 1 3/8″ I.d; 18″ length 1.00 pc
  • Sampling Rod : Steel pipe, 44 mm (1 3/4″) diameter, 1.5 m length 20.00 pcs
    Drive weight Assembly Consist of :
  • Hammer : Steel, 63.5 kg weight, 8″ diameter, 240 mm height 1.00 pc
  • Anvil : Machine steel, 6″ diameter, 150 mm height 1.00 pc
  • Guide Rod : Steel, 76.2 cm drop height 1.00 pc
    Tripod Assembly Consist of :
  • Tripod Stand : Steel pipe 71 mm dia # 2.5 mm, 6 metre standing 1.00 pc
  • Pulley : 20 cm diameter 1.00 pc
  • Rope : Manila rope, 3/4 diameter x 15 metre 1.00 rol
  • Vertical Guide : Machine steel, 160 mm dia, 45 mm hole dia 1.00 pc
  • Pipe Wrench : 24” length 2.00 pcs
  • Dimension (l x w x h) : 330 x 60 x 60 Cm/ Gross weight : 445 Kg
 

 

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), electric, 220 Volt, 750 Watt, 1 Phase
 Electric Sample Extruder

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), electric, 220 Volt, 750 Watt, 1 Phase.

  • Supplied without sampling tube
  • Standard supply with instruction manual operating
  • Dimension (l x w x h) : 40 x 50 x 130 Cm
  • Gross weight : 60 Kg

For determining soil density in place
 Corps of Engineer Soil Surface Sampler

ASTM D-2937
For determining soil density in place

Consist of :

  • Hammer : 1.00 set
    – Machine steel, plated, 10 lbs
    – sliding weight : 27 1/4″ falling height 12.00 pcs
  • Sampling Tube :
    – Machine steel, plated, 3″ o.d.,
    – 2-7/8″ i.d., 2-13/16″ length
    – Standard supply with instruction manual operating
    – Dimension (l x w x h) : 25 x 25 x 100 cm
    – Gross Weight : 35 kg

 

 

For determining cone resistance and friction resistance of soil layers
 Dutch Cone Penetrometer / Sondir 5 Ton Capacity

ASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers

Cosist of :

  • Press-In Apparatus : Steel construction, manually operated 5 tons capacity. 1.00 set
    Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread. 20.00 pcs
    Plunger Rod : Round bar, 15 mm dia, 1 mtr length 20.00 pcs
    Adaptor :
    Push Adaptor Machined steel. 1.00 pc
    Pull Adaptor Machined steel. 1.00 pc
    Spiral Anchor
    Spiral Anchor : Machined steel, welded 1.5 m length 4.00 pcs
    Handle And T-piece : Machined steel, welded 1.00 set
    Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter 1.00 pc
    Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter. 1.00 pc
    Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) 1 set allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1). 1.00 set
    Fasten press Long Fasten Press Short Fasten Press Manometer 2.00 pcs
    Fasten press : Beam Cannal
    Long Fasten Press : 1.8 m length, 12 cm width 2.00 pcs
    Short Fasten Press : 1.2 m length, 15 cm width 2.00 pcs
    Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower mount connection (Calibration and certified KAN LK-011-IDN) 1.00 pcs
    Manometer : 500 kg/ cm² cap, single pointer, 6″ dia, lower mount connection (Calibration and certified KAN LK-011-IDN) 1.00 pcs
    Dimension (l x w x h): 220 x 120 x 80 cm/ Gross weight: 500 kg
    Standard supply with instruction manual books

 

For determining cone resistance and friction resistance of soil layers
 Hydraulic Cone Penetrometer / Sondir Hidrolik 5 Ton Capacity

ASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers

Terdiri dari :

  • Hydraulic Driving Appliance : Steel construction, hydraulic operated 5 Ton Capacity Single cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges. The trailer is suitable for towing behind a truck 1.00 unit
  • Manometer : 60 kg / cm² capacity, lower mount connection. 1.00 pcs
  • Manometer : 500 kg / cm² capacity, lower mount connection 1.00 pcs
  • Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 9 HP, hand starter 1.00 unit
  • Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length tappered thread 20.00 pcs
  • Plunger Rod : Round bar, 15 mm dia, 1 mtr length 20.00 pcs
  • Adaptor Consist of : Push Adaptor, Pull Adaptor 1.00 pcs
  • Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets 1.2 metre length 4.00 pcs
  • Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare 1.00 set
  • Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter 1.00 pcs
    Friction Cone : Precision machine steel hardened, with friction jacket tappered thread 60º angle, 35.7 mm diameter 1.00 pcs
  • Wrenches Set 1.00 set
  • Long Fasten Press : Beam cannal, 150 cm length, 12 cm width 2.00 pcs
  • Hydraulic Hose : Flexible hose with push/ pull coupler 250 cm length, 10.000 psi capacity 2.00 pcs
  • Field Trolley : Fillin sounding apparatus (replacing SO-202A; SO-203A; SO-205A; SO-219.1; GE-699A) 1.00 unit
  • Standard supply with instruction manual books
  • Dimension (l x w x h) : 130 x 95 x 210 cm
  • Gross Weight : 690 kg

 

It uses a hydraulic system to move the drilling components. Skid Mounted with knock down assembly, is suitable for use on drilling in areas that are difficult to reach. Capable for drilling to a depth of 75 meters
 Mesin Bor Jacro

Portable Hydraulic Drill Rig, angin YANMAR 15 PK boom penyangga rig 2 bh, velve 5 tingkat sistim rantai, win 2 bh, oil pump, orbit, geer bor, slang hydraulic
1 Drill rod NQ 3 meter
2 Drill rod NQ 1,5 meter
3 Mata bor wing bit 73 mm tungsten
4 Clamp rod manual NQ
5 Core barel triple NQ wine lain lengkap over short, back hand + tungsten bit
6 Core bit NQ tungsten triple
7 Core Bit NQ diamond triple
8 Reamer NQ tungsten
9 Reamer NQ tungsten diamond
10 Core litter + Stop rimp NQ
11 Core case NQ
12 Kunci bormali NQ (2 outer + 2 inner)
13 Water supply pump SANCHIN 45 + diesel Ex.RRC 6,5 Pk
14 Mud Pump SANCHIN 120 + diesel EX.RRC 10 Pk
15 Selang tekan karet Ø 1”
16 Hope paly pipe Ø 3/4 ”
17 Pipa Wrench 36” – Tekiro – Japan
18 Pipa wrench 24” – Tekiro – Jepang
19 Liquid Polimer

 

For determination of field CBR value (rapid quality control)
 Dynamic Cone Penetrometer/DCP

For determination of field CBR value (rapid quality control)

Consist of :

  • Handle : Stainless steel 1.00 pc
  • Hammer : Machined steel, Painted, 8 kg weight 1.00 pc
  • Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm 1.00 pc
  • Anvil : Machined steel, welded painted 1.00 pc
  • Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective 1.00 pc
  • Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor 3.00 pcs
  • Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale 1.00 pc
  • Carrying Bag : Water proof cloth 1.00 pc
  • Open End Wrench : Vanadium steel 12/13, 14/15 2.00 pcs
  • Dimension (l x w x h) : 115 x 40 x 40 cm/ Gross weight : 18 Kg
  • Standard supply with instruction manual books

 

For determining ultimate bearing capacity of soil on place by means of field loading test
 Plate Bearing Test Set

ASTM D-1194 / AASHTO T-235
For determining ultimate bearing capacity of soil on place by means of field loading test

Consist of :

  • Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated 1.00 pc
  • Manometer : 6″ diameter, 30 tons capacity, 0.5 tons,increment 1.00 pc
  • Hydraulic Cylinder : 30 tons capacity 1.00 pc
  • Hydraulic Hand Pump : Double action, 10.000 psi capacity 2.00 pcs
  • Hydraulic Hose : 10.000 psi, 180 cm length 1.00 set
  • Reference Beam : Steel pipe, 2 x 150 cm span 1.00 pc
  • Circular Bearing Plate : 6″ diameter, machined steel, 1″ thick 1.00 pc
  • Circular Bearing Plate : 10″ diameter, machined steel, 1″ thick 1.00 pc
  • Circular Bearing Plate : 12″ diameter, machined steel, 1″ thick 1.00 pc
  • Circular Bearing Plate : 18″ diameter, machined steel, 1″ thick 1.00 pc
  • Circular Bearing Plate : 24″ diameter, machined steel, 1″ thick 1.00 pc
  • Circular Bearing Plate : 30″ diameter, machined steel, 1″ thick
  • Square Bearing Plate : 12″ x 12″, machined steel, 1″ thick 1.00 pc
  • Dial Indicator : Travel range 30 x readibility 0.01 mm 2.00 pcs
  • Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-off switch 2.00 pcs
  • Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg
  • Standard supply with instruction manual books

 

For determining CBR value on place
 Field CBR Test Set (CBR Lapangan)

For determining CBR value on place

Consist of :

  • Mechanical Jack : Cast alumunium housing, 5 tons cap, hand operated, 2 speeds 1.00 pcs
  • Swivel head : Cast alumunium 1.00 pcs
    Field Penetration Piston Consist of :
  • Penetration Piston : Machine steel, galvanized, 1.954″ piston diameter 1.00 pcs
  • Extention set : Machined steel, plated, 5 cm, 10 cm, 20 cm, 30 cm, and 60 cm, provided with connecting adaptor 1.00 set
  • Reference Beam : Steel pipe, 150 cm span include with two stand 1.00 set
  • Circular Surcharge Weight : Machine steel, plated, 10″ dia, 10 lbs weight 1.00 pcs
  • Slotted Surcharge Weight : Machine steel, plated, 8″ dia, 10 lbs weight. 1.00 pcs
  • Slotted Surcharge Weight : Machine steel, plated, 8.5″ dia, 20 lbs weight 1.00 pcs
  • Proving Ring : 2000 lbs capacity, Calibration & certified KAN LK-011-IDN 1.00 set
  • Proving Ring : 10,000 lbs capacity, Calibration & certified KAN LK-011-IDN 1.00 set
  • Dial Indicator : Range 30 x 0.01 mm 1.00 pcs
  • Dial Holder : Chrome plated shaft with sample clamping device, powerfull magnet with on-off switch. 1.00 pcs
  • Standard supply with :
    – Instruction manual books
    – Calibration certificate KAN LK-11-IDN
  • Dimension (l x w x h) : 140 x 35 x 35 cm/ Gross weight : 75 kg

 

For determining penetration resistance of soil layers
 Proving Ring Penetrometer

For determining penetration resistance of soil layers

Consist of :

  • Penetration Rod : Round bar, 51.5 cm/49 cm length with 5 cm increment lines. 2.00 pcs
  • Penetration Cone : Machine steel, hardened, plated, 1 sq. in cross section area, 30 deg. angle. 2.00 pcs
  • Holder : Alumunium handle 1.00 pc
  • Carrying Case : Woodden case 1.00 pc
  • Proving Ring : 100 kg capacity, (Calibration and certified KAN LK-011-IDN) 1.00 set
  • Open End Wrench : Vanadium steel 2.00 pcs
  • Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
  • Standard supply with instruction manual books

 

Widely used in analyzing soil surface
 TVA Penetration

Widely used in analyzing soil surface.

Consist of :
Penetration Rod and Chamber : Steel pipe, 65 cm length with hydraulic chamber

Consist of :

  • Penetration Rod : Round bar, 40 cm length 2.00 pcs
  • Hydraulic Chamber : Machine steel, 100 kg capacity 1.00 pc
  • Penetration Needle : Machine steel, hardened, tip 0.5, 1.0, 2.0, 3.0, sq. Cm 1.00 set
  • Cross section area
  • Holder : Alumunium handle 1.00 pc
  • TVA Manometer : 100 kg capacity 1.00 pc
  • Carrying Case : Wooden case 1.00 pc
  • Open End Wrench : Vanadium steel 2.00 pcs
  • Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
  • Standard supply with instruction manual books

 

For determining liquid limit of soil sample
 Liquid Limit Test Set (Hand Operated)

ASTM D-4318/AASHTO T-89/SNI 03-1967-1990
For determining liquid limit of soil sample

Consist of :

  • Liquid Limit Device : Hand Operated, brass cup, hard rubber base, provided with counter 1.00 set
  • ASTM Grooving Tool : Machine steel, head gauge 1.00 pc
  • Cassagrande Grooving Tool : Brass plate 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1.00 pc
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity 1.00 pc
  • Spatula : Plastic handle, stainless blade, 150 mm length 1.00 pc
  • Scraper : Plastic handle, stainless blade, 100 mm length 1.00 pc
  • Dimension (l x w x h) : 24 x 26 x 23 cm/ Gross weight : 4 kg
  • Standard supply with instruction manual books

 

For determining liquid limit of soil sample
 Liquid Limit Test Set (Electric)

ASTM D-4318/AASHTO T-89/SNI 03-1967-1990
For determining liquid limit of soil sample

Consist of :

  • Liquid Limit Device : Electric, 220 V-AC, brass cup, hard rubber base, provided with counter 1.00 set
  • ASTM Grooving Tool : Machine steel, head gauge 1.00 pc
  • Cassagrande Grooving Tool : Brass plate 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1.00 pc
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity 1.00 pc
  • Spatula : Plastic handle, stainless blade, 150 mm length 1.00 pc
  • Scraper : Plastic handle, stainless blade, 100 mm length 1.00 pc
  • Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 7 kg
  • Standard supply with instruction manual books

 

For determining plastic limit of soil sample
 Plastic Limit Test Set

ASTM D-4318/AASHTO T-90
For determining plastic limit of soil sample

Consist of :
Plastic Limit Plate : glass made

Consist of :

  • Reference Rod : Stainless steel rod, 3.2 mm diameter 1.00 pc
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity 1.00 pc
  • Spatula : Plastic handle, stainless blade, 150 mm length 1.00 pc
  • Scraper : Plastic handle, stainless blade, 100 mm length 1.00 pc
  • Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 5 kg
  • Standard supply with instruction manual books

 

For determining shrinkage limit of soil sample
 Shrinkage Limit Test Set

ASTM D-427/AASHTO T-92
For determining shrinkage limit of soil sample

Consist of :

  • Prong Plate : 1.6 mm thick hard plastic, 76.2 mm square, 3 stainless steel needles, 0.8 mm dia, 3.2 mm height 1.00 pc
  • Monel Shrinkage Dish : Flat bottom; 44.4 mm i.d, 12.7 mm height approx 1.00 pc
  • Cristalizing Dish : Glass made
  • Consist of :
  • Dish : Glass, 57.2 mm i.d, 12.7 mm height approx 1.00 pc
  • Overflow Dish : 9 cm dia approx 1.00 pc
  • Mercury : Bottled 1.00 kg
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity 1.00 pc
  • Spatula : Plastic handle, stainless blade, 150 mm length 1.00 pc
  • Scraper : Plastic handle, stainless blade, 100 mm length 1.00 pc
  • Dimension (l x w x h) : 10 x 10 x 30 Cm/ Gross weight : 6 Kg
  • Standard supply with instruction manual books

 

For determining grain size distribution of fine soil sample
 Hydometer Aalysis Test Set

ASTM D-422/AASHTO T-88
For determining grain size distribution of fine soil sample

Consist of :

  • Hydrometer A ( 152 H ) : Glass, stream line, range 0 to 60 gr soil/ ltr 1.00 pc
  • Hydrometer B ( 151 H ) : Glass, stream line, range 0.995 to 1.038 1.00 pc
  • Mechanical Stirer : Electric, 220 volt, cast alumunium frame, 10.000 rpm 1.00 pc
  • Dispersion Cup : Stainless steel cup, 3.75″ top diameter, 2.6″ bottom diameter, 7″ height brass baffles 1.00 pc
  • Hydrometer Jar Bath : Steel sheet, fibre glass couted, temperature control

        Consist of :

  • Bath : Steel sheet, fibre glass coated, 60 x 30 x 40 cm 1.00 pc
  • Water Heater : Electric, range ambient to 40°C 1.00 pc
  • Dispension Agent Consist of :
  • Sodium Hexa : Bottled, powder 1.00 kg
  • Water Glass : Bottled, liquid 1.00 kg
  • Hydrometer Jar : Glass, 1000 ml capacity, 2 1/2″ diameter approx 3.00 pcs
  • Graduated Cylinder : 1000 ml capacity, glass made, single numbering 1.00 pc
  • Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length 1.00 pc
  • Dimension (l x w x h) : 90 x 50 x 50 Cm/ Gross weight : 50 Kg
  • Standard supply with instruction manual books

 

For determining grain size distribution of soil particles or sand/ gravel
 Sieve Analysis

ASTM E-11
For determining grain size distribution of soil particles or sand/gravel
Brass frame 8″ diameter, 70 mm height
Dimension (l x w xh) : 22 x 22 x 6.5
Gross weight : 0.75 Kg

SIEVE # 4 : Brass round 8 inch diameter, mesh 4.75 mm opening
SIEVE # 8 : Brass round 8 inch diameter, mesh 2.36 mm opening
SIEVE # 10 : Brass round 8 inch diameter, mesh 2.00 mm opening
SIEVE # 12 : Brass round 8 inch diameter, mesh 1.70 mm opening
SIEVE # 16 : Brass round 8 inch diameter, mesh 1.18 mm opening
SIEVE # 20 : Brass round 8 inch diameter, mesh 0.850 mm opening
SIEVE # 30 : Brass round 8 inch diameter, mesh 0.600 mm opening
SIEVE # 40 : Brass round 8 inch diameter, mesh 0.425 mm opening
SIEVE # 50 : Brass round 8 inch diameter, mesh 0.300 mm opening
SIEVE # 60 : Brass round 8 inch diameter, mesh 0.250 mm opening
SIEVE # 70 : Brass round 8 inch diameter, mesh 0.212 mm opening
SIEVE # 80 : Brass round 8 inch diameter, mesh 0.180 mm opening
SIEVE # 100 : Brass round 8 inch diameter, mesh 0.150 mm opening
SIEVE # 120 : Brass round 8 inch diameter,mesh 0.125 mm opening
SIEVE # 140 : Brass round 8 inch diameter, mesh 0.106 mm opening
SIEVE # 170 : Brass round 8 inch diameter, mesh 0.090 mm opening
SIEVE # 200 : Brass round 8 inch diameter, mesh 0.075 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

SIEVE 4″ : Brass round 8 inch diameter, mesh 101.6 mm opening
SIEVE 3 1/2″ : Brass round 8 inch diameter, mesh 88.9 mm opening
SIEVE 3″ : Brass round 8 inch diameter, mesh 76.2 mm opening
SIEVE 2 1/2″ : Brass round 8 inch diameter, mesh 62.5 mm opening
SIEVE 2″ : Brass round 8 inch diameter, mesh 50.8 mm opening
SIEVE 1 3/4″ : Brass round 8 inch diameter, mesh 44.4 mm opening
SIEVE 1 1/2″ : Brass round 8 inch diameter, mesh 38.1 mm opening
SIEVE 1 1/4″ : Brass round 8 inch diameter, mesh 31.7 mm opening
SIEVE 1″ : Brass round 8 inch diameter, mesh 25.4 mm opening
SIEVE 7/8″ : Brass round 8 inch diameter, mesh 22.2 mm opening
SIEVE 3/4″ : Brass round 8 inch diameter, mesh 19.0 mm opening
SIEVE 5/8″ : Brass round 8 inch diameter, mesh 15.8 mm opening
SIEVE 1/2″ : Brass round 8 inch diameter, mesh 12.7 mm opening
SIEVE 7/16″ : Brass round 8 inch diameter, mesh 11.1 mm opening
SIEVE 3/8″ : Brass round 8 inch diameter, mesh 9.5 mm opening
SIEVE 5/16″ : Brass round 8 inch diameter, mesh 7.9 mm opening
SIEVE 1/4″ : Brass round 8 inch diameter, mesh 6.3 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

 

Electric Sieve Shaker
 Electric Sieve Shaker

  • 220 V-AC, 1/4 HP, 300 Watt, Steel base, cast alumunium pulley, 8inch sieve diameter, 8 pcs sieve capacity
  • Built- in timer 60 minutes pulley, 8inch sieve diameter, 8 pcs sieve capacity
  • Built- in timer, adjustable 60 minutes timer with automatic shutoff
  • Supplied without lid and receiver (Pan Cover).
  • Standard supply with instruction manual book
  • Dimension (l x w x h) : 50 x 50 x 100 cm.
  • Gross Weight : 50 Kg.

 

Mechanical End Over End Shaker
 Mechanical End Open End Shaker

  • Electric, 220 V/ 50 Hz/ 1 Phase, 50 Rpm.
  • Supplied complete with 2 glass jar 1000 ml and rubber bungs.
  • Part / used to Hydrometer analysis test set (SO-330A)
  • Dimension (l x w x h) : 40 x 60 x 60 cm/ Gross weight : 30 Kg.
  • Standard supply with instruction manual books

 

Vacuum Stand (GMM Vacuum Methode)
 Vacuum Stand (GMM Vacuum Methode)

  • To facilitate evacuation of air from soil/fine aggregate in flask.
  • Welded steel frame, vacuum valve, adjustable platen height, provided with vacuum gauge, 0 – 76 cm HG capacity measuring.
  • Accommodate 6 flasks 500 ml capacity, vacuum type
  • Supplied complete with vacuum pump and flasks
  • Dimension (l x w x h) : 120 x 70 x 160 cm/ Gross weight : 80 Kg
  • Standard supply with instruction manual books

 

For determining specific gravity of soil sample
 Spesific Gravity (Heating Methode)

ASTM D-854/AASHTO T-100
For determining specific gravity of soil sample

Consist of :

  • Hot Plate : Electric, 1000 Watt, 220 Volt 1.00 pc
  • Asbestos Wire Gauze : Asbestos centre, 15 x 15 cm 1.00 pc
  • Mixing Bow : Stainless steel, round type, 24 cm diameter 1.00 pc
  • Density Bottle : Glass made, 100 ml capacity 3.00 pcs
  • Funnel : Glass, wide mouth 1.00 pc
  • Wash Bottle : Plastic, 250 ml capacity 1.00 pc
  • Thermometer : Range 0 to 100°C, glass, alcohol indicator, 30 cm length 1.00 pc
  • Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 10 Kg
  • Standard supply with instruction manual books

 

For determining the water absorption of fine aggregate at saturated surface dry
 Spesific Gravity & Absorption of Fine Aggregate Test Set

ASTM C-128/AASHTO T-84
For determining the water absorption of fine aggregate at saturated surface dry

Consist of :
Cone and Tamper :
Consist of :

  • Cone : Brass, 40 mm i.d at the top 90 mm i.d at the bottom, 75 mm height 1.00 pc
  • Tamper : Machine steel, galvanized, 340 gr weight, 25 mm diameter 1.00 pc
  • Mixing Bowl : Stainless steel, round type, 24 cm diameter 1.00 pc
  • Glass Plate : Glass 10 mm thick, 30 x 30 cm 1.00 pc
  • Volumetric Flask : 500 ml capacity, heat resistance glass 1.00 pc
  • Spatula : Stainless blade, 150 mm length, plastic handle 1.00 pc
  • Dimension (l x w x h): 40 x 40 x 30 cm/ Gross weight: 7 Kg
  • Standard supply with instruction manual books

 

For determining specific gravity of soil sample
 Spesific Gravity (Vacuum Methode) 1

ASTM D-854/AASHTO T-100, According SNI 03-6893-2002
For determining specific gravity of soil sample

Consist of :

  • Vacuum Stand : Wooden base, steel pipe column, 2 valves 1.00 set
  • Mixing Bow : Stainless steel, round type, 250 mm diameter 1.00 pc
  • Graduated Cylinder : Glass made, 500 ml capacity, single numbering 1.00 pc
  • Volumetric Flask : 500 ml capacity, vacuum 2.00 pcs
  • Funnel : Glass, wide mouth 1.00 pc
  • Wash Bottle : Plastic, 250 ml capacity 1.00 pc
  • Pipette : Glass, 5 ml capacity 1.00 pc
  • Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length 1.00 pc
  • Vacuum Manometer : 4 inch diameter., 0 – 76 cm HG capacity measuring 1.00 pc
  • Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase 1.00 pc
  • Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg
  • Standard supply with instruction manual books

 

For determining specific gravity of soil sample
 Spesific Gravity (Vacuum Methode) 2

ASTM D-854 /AASHTO T-100, According SNI 03-6893-2002
For determining specific gravity of soil sample

Consist of :

  • Vacuum Stand : Wooden base, steel pipe column, 2 valves 1.00 set
  • Mixing Bow : Stainless steel, round type, 250 mm diameter 1.00 pc
  • Graduated Cylinder : Glass made, 500 ml capacity, single numbering 1.00 pc
  • Vacuum Flask : 2000 ml cap, vacuum type, with neck large enough to admit 25 mm aggregate with airtight ground glass stopper 1.00 pc
  • Vacuum Flask : 1000 ml cap, vacuum type, with tabulation for vacuum hose 1.00 pc
  • Funnel : Glass, wide mouth 1.00 pc
  • Wash Bottle : Plastic, 250 ml capacity 1.00 pc
  • Pipette : Glass, 5 ml capacity 1.00 pc
  • Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length 1.00 pc
  • Vacuum Manometer : 4 inch diameter., 0 – 76 cm HG capacity measuring 1.00 pc
  • Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase 1.00 pc
  • Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg 1.00 pc
  • Standard supply with instruction manual books

 

For determining moisture – density relationship
 Compaction Test

ASTM D-698/D-1557; T-99/T-280/SNI-03-1742-1989
For determining moisture – density relationship

Consist of :

  • Standard Proctor Mold : Machine steel, plated, 4″ i.d., 4.584″ height, 2″ height of collar
  • Modified Proctor Mold : Machine steel, plated, 6″ i.d., 4.584″ height, 2″ height of collar
  • Standard Proctor Hammer : Machine steel, plated, 12″ drop height, 5,5 lbs weight
  • Modified Proctor Hammer : Machine steel, plated, 18″ drop height, 10 lbs weight
  • Extruder : Steel frame, hydraulic jack
  • Square Pan : Galvanized steel 65 x 65 x 7.5 cm
  • Thin Box : Alumunium, 60 gr capacity
  • Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering
  • Scoop : Cast alumunium, large size, round buttom
  • Trowel : Pointed type, wooden handle
  • Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
  • Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle
  • Steel Wire Brush : Steel wire, wooden handle
  • Dimension (l x w x h) : 62 x 62 x 40 Cm/ Gross Weight : 120 Kg
  • Standard supply with instruction manual books

 

For determining the bearing ratio of soil
 Laboratory CBR Test Set (Electric)

ASTM D-1883/AASHTO T-193; According SNI 03-1744-1989
For determining the bearing ratio of soil

Consist of :

  • Electrical Loading Machine : Electric, 220 V-AC, 1/2 HP, 1 Phase, speed 0.05″/min reversing switch 10.000 lbs capacity 1.00 set
  • CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar 3.00 pcs
  • Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height 1.00 pc
  • Cutting Edge : Machine steel, sharp edge 1.00 pc
  • Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight 3.00 pcs
  • Slotted Surcharge Weight : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight 3.00 pcs
  • Swell plate : Alumunium with adjustable stem 3.00 pcs
  • Swell Tripod : Alumunium for mounting sweel dial gauge 3.00 pcs
  • Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height, 10 lbs weight. 1.00 pc
  • Filter Paper : 6 inch diameter., 100 sheets/ box 1.00 box
  • Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN 1.00 set
  • Dial Indicator : Measuring range 0.01″ x 1″ 1.00 pc
  • Swell Dial Penetration : Range 30 mm x 0.01 mm 3.00 pcs
  • Square Pan : Galvanized steel, 65 x 65 x 7.5 cm 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering 1.00 pc
  • Scoop : Cast alumunium, large size, round buttom. 1.00 pc
  • Trowel : Pointed type, wooden handle. 1.00 pc
  • Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds 1.00 pc
  • Dimension (l x w x h) : 110 x 70 x 120 cm/ Gross Weight : 200 Kg
  • Standard supply with instruction manual books

 

For determining the bearing ratio of soil.
 Laboratory CBR Test Set (Hand Operated)

ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989
For determining the bearing ratio of soil.

Consist of :

  • Mechanical Loading Machine : Steel frame, hand operated, two speed, 10.000 lbs capacity 1.954″ piston diameter 1.00 set
  • CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar 3.00 pcs
  • Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height 1.00 pcs
  • Cutting Edge : Machine steel, sharp edge 1.00 pcs
  • Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight 3.00 pcs
  • Slotted Surcharge Weight : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight 3.00 pcs
  • Swell plate : Alumunium with adjustable stem 3.00 pcs
  • Swell Tripod : Alumunium for mounting sweel dial gauge 3.00 pcs
  • Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height, 10 lbs weight 1.00 pcs
  • Filter Paper : 6 inch diameter., 100 sheets/ box 1.00 box
  • Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN 1.00 set
  • Dial Indicator : Measuring range 0.01″ x 1″ 1.00 pcs
  • Swell Dial Penetration : Range 30 mm x 0.01 mm 3.00 pcs
  • Square Pan : Galvanized steel, 65 x 65 x 7.5 cm 1.00 pcs
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering 1.00 pcs
  • Scoop : Cast alumunium, large size, round buttom. 1.00 pcs
  • Trowel : Pointed type, wooden handle. 1.00 pcs
  • Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds 1.00 pcs
  • Dimension (l x w x h) : 110 x 70 x 70 cm/ Gross weight : 200 Kg
  • Standard supply with instruction manual books

 

For determining coeffisient of permeability of compacted soil sample
 Combination Permeameter (Constant head & Falling head testing methode)

ASTM D-2434/AASHTO T-215
For determining coeffisient of permeability of compacted soil sample

Consist of :

  • Sample Chamber : Transparent fibre glass, 2 1/2″ i.d, 8″ height, compessive spring, cast,alumunium body 1.00 set
  • Funnel : Plastic, wide mouth, with over flow 1.00 pc
  • Frame : Alumunium frame 1.00 pc
  • Porous Stone : 2 1/2″ diameter 2.00 pcs
  • Burette : 50 ml capacity 1.00 pc
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min 1.00 pc
  • Dimension (l x w x h) : 110 x 40 x 30 cm/ Gross weight : 10 Kg
  • Standard supply with instruction manual books

For determining coeffisient of permeability of compacted soil sample
 Compaction Permeameter Test Set 1

For determining coeffisient of permeability of compacted soil sample.

Consist of :

  • Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d, inlet-outlet connector, overflow valve, porous stone. 1.00 set
  • Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter) 1.00 set
  • Graduated Cylinder : Glass made,100 ml capacity,single numbering 1.00 pc
  • Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min 1.00 pc
  • Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
  • Standard supply with instruction manual books

For determining coeffisient of permeability of compacted soil sample
 Compaction Permeameter Test Set 2

For determining coeffisient of permeability of compacted soil sample.

Consist of :

  • Compaction Permeameter : 1/33.33 cu. ft. mold , 6 inch i.d, inlet-outlet connector, overflow valve, porous stone. 1.00 set
  • Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter) 1.00 set
  • Graduated Cylinder : Glass made, 100 ml capacity, single numbering 1.00 pc
  • Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min 1.00 pc
  • Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
  • Standard supply with instruction manual books

For determining the density of compacted soil in place
 Sand Cone Test Set

ASTM D-1556/AASHTO T-191, According Standard R-SNI 2828 :2008
For determining the density of compacted soil in place

Consist of :

  • Sand Cone Bottle : Plastic, 4 ltr. capacity. Approx 1.00 pc
  • Sand Cone Funnel : Seamless metal, turning stopper, 6 1/2″ diameter bottom, 1/2 neck diameter 1.00 pc
  • Base Plate : Cast alumunium, 12″ x 12″ 1.00 pc
  • Graduated Sand : Uncemented sand, passing # 10, retained # 60, 25 kg cap 1.00 zak
  • Sample Can : Round can, tinned metal 6.00 pcs
  • Scoop : Cast alumunium, large size, round buttom. 1.00 pc
  • Spoon : Stainless steel, large size 1.00 pc
  • Trowel : Pointed type, wooden handle 1.00 pc
  • Chisel : Hardened steel, 30 cm length 1.00 pc
  • Rubber Mallet : Rubber head, 0.5 Kg weight, wooden handle 1.00 pc
  • Dimension (l x w x h): 70 x 50 x 50 cm / Gross weight: 50 kg
  • Standard supply with instruction manual book

For determining the moisture content of soil by means of calcium carbide gas pressure meter
 Speedy Moisture Tester (c/w Digital Balance)

AASHTO T-217; SNI 03-1965.1-2000
For determining the moisture content of soil by means of calcium carbide gas pressure meter
Consist of :

  • Speedy Gauge : M/C range 0-20 %, sens. : 0.2 %, sample weight 20 gr 1.00 pc
  • Speedy Balance : Digital 200 gr capacity x 0.1 gr sensitivity 1.00 pc
  • Calcium Carbide; : Reagent absorbent, CaC₂ calcium carbide 1.00 can
  • Measuring Spoon : Cast alumunium 1.00 pc
  • Crushing Ball : Steel ball, 31,7 mm diameter 2.00 pcs
  • Cleaning Brush : Plastic brush/ plastic holder 1.00 pc
  • Carrying Case : Wooden case with handle 1.00 pc
  • Dimension (l x w x h): 45 x 45 x 30 cm / Gross Weight: 15 Kg
  • Standard supply with instruction manual books

For determining moisture content of soil sample
 Moisture Content Test Set

For determining moisture content of soil sample

Consist of :

  • Cent O-Gram Balance : 1.00 pc
    – 311 gr capacity x 0.01 gr readability
    – Front beam : 1g x 0.01g ; second beam : 10g x 1g
    – Third beam : 100g x 10g; rear beam : 200g x 100g
  • Drying Oven : 1.00 pc
    – 53 litre capacity ; natural air circulation, temperature
    – Stainless steel interior (w x h x d) = 400 x 400 x 330 mm
    – Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm
    – from +30 °C (however, at least 5 °C above ambient) up to +220 °C
    – Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C
    – Electric load (during heating) approx = 1400 Watt
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Dimension (l x w x h) : 80 x 80 x 90 Cm/ Gross weight : 70 Kg
  • Standard supply with instruction manual books

For determining stress strain relationship of cohessive soil without confining pressure
 Unconfined Compression Machine (Hand Operated)

ASTM D-2166/AASHTO T-208/SNI 03-3638-1994
For determining stress strain relationship of cohessive soil without confining pressure

Consist of :

  • Unconfined Compression Machine : Cast alumunium, gear box, adjustable height of top platen, hand operated 200 kg capacity 1.00 set
  • Sample Tubes
    Consist of :
  • Sample Tubes : 35.0 mm dia x 70 mm height 1.00 pc
  • Sample Tubes : 47.5 mm dia x 95 mm height 1.00 pc
  • Sample Tubes : 70.0 mm dia x 140 mm height 1.00 pc
  • Split Sample Tubes :
    Consist of :
  • Split Sample Tubes : 35.0 mm dia x 70 mm height 1.00 pc
  • Split Sample Tubes : 47.5 mm dia x 95 mm height 1.00 pc
  • Split Sample Tubes : 70.0 mm dia x 140 mm height 1.00 pc
    Sample Extruder :
  • Extruder : 34.5 mm dia x 71 mm height 1.00 pc
  • Extruder : 47.0 mm dia x 96 mm height 1.00 pc
  • Extruder : 69.5 mm dia x 141 mm height 1.00 pc
  • Trimmer : Steel frame, 3 tubes size 1.00 set
  • Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN) 1.00 set
  • Dial Indicator : Range 30 mm x 0.01 mm 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Wire Saw : 10 cm length approx 1.00 pc
  • Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 50 Kg
  • Standard supply with instruction manual books

For determining stress strain relationship of cohessive soil without confining pressure
 Unconfined Compression Machine (Electric)

ASTM D-2166/AASHTO T-208/SNI 03-3638-1994
For determining stress strain relationship of cohessive soil without confining pressure

Consist of :

  • Unconfined Compression Machine : Electric, 220V-AC, 200 W, variable speed, adjustable height 1.00 set
  • Sample Tubes
  • Consist of :
  • Sample Tubes : 35.0 mm dia x 70 mm height 1.00 pc
  • Sample Tubes : 47.5 mm dia x 95 mm height 1.00 pc
  • Sample Tubes : 70.0 mm dia x 140 mm height 1.00 pc
  • Split Sample Tubes :
    Consist of :
  • Split Sample Tubes : 35.0 mm dia x 70 mm height 1.00 pc
  • Split Sample Tubes : 47.5 mm dia x 95 mm height 1.00 pc
  • Split Sample Tubes : 70.0 mm dia x 140 mm height 1.00 pc
  • Sample Extruder :
  • Extruder : 34.5 mm dia x 71 mm height 1.00 pc
    Extruder : 47.0 mm dia x 96 mm height 1.00 pc
  • Extruder : 69.5 mm dia x 141 mm height 1.00 pc
  • Trimmer : Steel frame, 3 tubes size 1.00 set
  • Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN) 1.00 set
  • Dial Indicator : Range 30 mm x 0.01 mm 1.00 pc
  • Thin Box : Alumunium, 60 gr capacity 12.00 pcs
  • Wire Saw : 10 cm length approx 1.00 pc
  • Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 60 Kg
  • Standard supply with instruction manual books

For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loaded and drained axially
 Consolidation Test Set

ASTM D-2435/AASHTO T-216
For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loaded and drained axially

Consist of :

  • Consolidation Frame
    Consist of :
  • Frame : Cast alumunium, two test unit 1.00 set
  • Loading set : Three alternative lever arm 1:9, 1:10, 1:11 2.00 set
  • Consolidometer : Brass, 50.5 mm sample dia., porous stone,loading capacity. 2.00 set
  • Loads :
    Consist of :
  • Loads : 500 gr weight 4.00 pcs
  • Loads : 1000 gr weight 2.00 pcs
  • Loads : 2000 gr weight 2.00 pcs
  • Loads : 4000 gr weight 2.00 pcs
  • Loads : 4000 gr weight
  • Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder 1.00 set
  • Dial Indicator : Range 10 mm x 0.01 mm 2.00 pcs
  • Wire Saw : 10 cm length approx 1.00 pc
  • Dimension (l x w x h) : 80 x 80 x 150 cm/ Gross weight : 130 Kg
  • Standard supply with instruction manual books

For determining shearing resistance of soil sample
 Direct Shear Test Set (Hand Operated)

ASTM D-3080/AASHTO T-236
For determining shearing resistance of soil sample

Consist of :

  • Loading Machine

              Consist of :

  • Frame : Welded steel frame, hand operated gear box, 100 kg cap 1.00 pc
  • Loading Hanger : Machine steel, galvanized, supplied without load 1.00 pc
  • Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity. 1.00 set
  • Loads : Slotted, machine steel, galvanized

              Consist of :

  • Load : 3167 gr weight 2.00 pcs
  • Load : 6334 gr weight 1.00 pc
  • Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder 1.00 set
  • Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN) 1.00 pc
  • Dial Indicator : Range 10mm x 0.01mm 1.00 pc
  • Dial Indicator : Range 20mm x 0.01mm 1.00 pc
    Wire Saw : 10 cm length approx 1.00 pc
  • Dimension (l x w x h) : 130 x 20 x 130 cm/ Gross Weight : 125 Kg
  • Standard supply with instruction manual books

For determining shearing resistance of soil sample
 Electric Direct Shear Test Set

ASTM D-3080/AASHTO T-236
For determining shearing resistance of soil sample

Consist of :

  • Loading Machine
    Consist of :
  • Electric shear Machine : Welded steel frame, electric 220V, 200 Watt, 50, Hz 25 speed gear box 0.00 to 1.2 mm/ minute 1.00
  • Loading Hanger : Machine steel, galvanized, supplied, without load 1.00
  • Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity 1.00
  • Loads : Slotted, machine steel, galvanized
    Consist of :
  • Load : 3167 gr weight 2.00
  • Load : 6334 gr weight 1.00
  • Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder 1.00
  • Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN) 1.00
  • Dial Indicator : Range 10mm x 0.01mm 1.00
  • Dial Indicator : Range 20mm x 0.01mm 1.00
  • Wire Saw : 10 cm length approx 1.00
  • Dimension (l x w x h) : 130 x 25 x 130 cm/ Gross Weight : 125 Kg
  • Standard supply with instruction manual books

 

Triaxial Test Set
 Triaxial Test Set

ASTM D-2850

  • The triaxial test set provides test load up to 300 kgf at any speed from 0.00 to 3.00 per minutes. This features provides the capability for use in application such as constant rate of load and constant rate of stress.
    The unit incorporates :
  • Triaxial Compression Machine : CD or UU & CU, capacity 300 kgf, loading speed 0.00 to 3.00 mm per minute, cell (speciment) size 35mm and 50mm maximum, Control power on-off switch, fast advanced selector swith. Variable speed, hand-operated and motorized operated with electric consumption 220V AC/ 200 W 1.00 set
  • Load Measuring : Load ring 300 kgf capacity, Calibration & certified KAN LK-011-IDN 1.00 pcs
  • Displacement Measuring : dial gauge 30 mm x 0,01mm 1.00 pcs
  • Panel Control Consist of : 1.00 set
  • Measuring Pore Pressure : 10 Kg/Cm (Digital reading for pore pressure value) 1.00 pcs
  • Measuring Cell Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN 1.00 pcs
  • Measuring Back Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN 1.00 pcs
  • Burrete : for measuring pore pressure 1.00 pcs
  • Top Water Tank : plastic, 3 litre capacity 1.00 pcs
  • Buttom Water Tank : stainless steel, 5 litre capacity 1.00 pcs
  • Vacuum Tank : Stainless steel tank 1.00 pcs
  • Triaxial Cells (Cell Chamber) Consist of : 1.00 set
  • Chamber : Made of non corrosive material and acrylic transparant. 1.00 pcs
  • Sample Pad : for 35 mm diameter specimen 1.00 pcs
  • Sample Pad : for 50 mm diameter specimen 1.00 pcs
  • Constant Pressure Consist of : 1.00 set
  • Air Regulator : for cell pressure 1.00 pcs
  • Air Regulator : for back pressure 1.00 pcs
  • Compressor Unit : compressor pump 0-10 Kg/ cm 1.00 set
  • Vacuum Unit : vacuum pump 0-70 cm Hg, rotary type, 220 V-AC, 1/2 HP, 1 Phase 1.00 set
  • Placing Tool : O-ring, 50 mm diameter 1.00 set
  • Placing Tool : O-ring, 35 mm diameter 1.00 set
  • Suction Membrane Device : stainless steel, 50 mm diameter 1.00 set
  • Suction Membrane Device : stainless steel, 35 mm diameter 1.00 set
  • Two Ways Split Former : 50 mm diameter 1.00 pcs
  • Two Ways Split Former : 35 mm diameter 1.00 pcs
  • Sample Tube : stainless steel tube, 50 mm diameter 1.00 pcs
  • Sample Tube : stainless steel tube, 35 mm diameter 1.00 pcs
  • Membrane : rubber, 50 mm diameter 10.00 pcs
  • Membrane : rubber, 35 mm diameter 10.00 pcs
  • Membrane Sealing Ring : ring rubber, 50 mm diameter 4.00 pcs
  • Membrane Sealing Ring : ring rubber, 35 mm diameter 4.00 pcs
  • Overall dimension : 200 x 80 x 180 cm/ Gross weight : 195 Kg
  • Standard supply with instruction manual books

 

Selengkapnya Klik Link Kontak Dibawah Ini

Permalink: https://www.alatpertambangan.com/kontak-kami